Details: Phoenix 19 Series TPEs use fewer fossil materials because they are partially sourced from natural feedstocks. The PHOENIX 19 Series TPEs are equal to our traditional TPEs in terms of their properties and processability. Despite being biobased, they are not biodegradable. They may be recycled and have high adherence to PP.

Product Series
PHOENIX TPE 19 Series (Shore 20A ~ 65D)
Partially based on renewable sources. For extrusion and injection moulding.

Features

• Biobased Carbon Content could be over 50%
• Easy to process and colour
• Excellent scratch endurance
• Excellent weather resistance
• Good tensile strength
• Overmold to Polypropylene
• Meet FDA requirements

Applications: Tool grip, toothbrush, pen grip, bike grip, seal, and many more…

Details: Both people and animals contain millions of bacteria, the most of which reside in the gut. They are all safe, and many of them are helpful. However, some bacterial species are dangerous. They may bring on serious illnesses.

Phoenix Antimicrobial TPEs were created to stop bacteria and other organisms from growing on your completed products. According to JIS Z2801:2010 and JIS Z2911-2000 standards, these TPE formulations have undergone testing.

Your items will be successfully shielded by these TPEs from odor, loss of aesthetic appeal, and physical qualities.

Features
Antibacterial and Antimicrobial
EPA, BPR, FDA approved

Applications: consumer goods, packaging, automotive, personal care, etc.

Details: Phoenix medical grade product lines are ideal for a range of medical device applications in the medical and pharmaceutical industries because they comply with international biocompatibility regulations. For a variety of applications, PHOENIX Thermoplastic Elastomers (TPEs) are now offered in transparent, translucent, white, and black colors.

Product Series
PHOENIX TPE 03 Series (Shore 15A ~ 80A)
SEBS based. High performance grade with low MFI. For extrusion and injection molding. Very excellent tear and tensile strength. Bond to polypropylene (PP). RoHS compliant. Conform to FDA.

PHOENIX TPE 04 Series (Shore 30A ~ 80A)
SEBS based. High resilience grade with lowest melt flow index (MFI). For extrusion and blow molding. RoHS compliant. Conform to FDA.

PHOENIX TPE 06 Series (Shore 15A ~ 95A)
SEBS based only. Superior weatherability. For outdoor use. FDA approved.

PHOENIX TPE 07 Series (Shore 15A ~ 95A)
SEBS based only. Superior weatherability. For outdoor use. FDA approved.

Features
– PVC alternatives / PVC replacement
– latex free – reducing allergic reactions in some individuals
– injection molding and extrusion manufacturing process
– transparent enough
– soft and smooth touch / appearance
– medical extrusion grade with great kinking resistance
– odorless
– co extrusion with PP – medical multilayer tubings
– excellent tear resistance and tensile strength
– excellent brittle temperature (-40 ~ -60℃)
– can be sterilized by many ways including ethylene oxide, Gamma radiation, steam sterilization.
– good flexible properties
– resistant to various fluids, such as water, embolism, grease, blood, urine

Applications
PHOENIX Translucent Thermoplastic Elastomers (TPEs) 04 Series
medical extrusion, medical tubing, catheter, uterine balloon tamponades

PHOENIX White Thermoplastic Elastomers (TPEs) 06 Series
single use, disposable syringe gasket / syringe plunger seals
soft touch parts/components of medical devices
glass vial caps

PHOENIX Black Thermoplastic Elastomers (TPEs) 07 Series
disposable syringe gasket / syringe plunger seals
soft touch parts/components of medical devices
glass vial caps

Details: Thermoplastic Elastomers (TPEs) that are flame retardant, such as PHOENIXTM, satisfy the standards of the UL 94 V-0 flammability rating standard, which was published by Underwriters Laboratories (UL). It has no halogen and produces little smoke when burned. It is safe to use because it complies with RoHS and REACH regulations. Material processing methods include injection and extrusion.

Product Series
PHOENIX TPE 18 Series (Shore 95A)

Features
Meet requirements of UL 94 (V-0, V-1, V-2) at 3.0 mm wall thickness
Halogen-free
Easy to process and color

Applications: parts in electronic devices and appliances, such as wire connectors, cables and etc.

Details: The thermoplastic elastomers PHOENIXTM PIR include post-industrial recycled material as well as scrap produced inside the material extruders’ plant. This product family reduces carbon emissions and entirely utilizes wastes produced by the business, making the material more sustainable and environmentally benign. Only materials in black or dark colors are offered.

Product Series
PHOENIX TPE 10 Series (Shore 30A ~ 90A)
Contain Post-Industrial Recycle (PIR) content. Sustainable, cut carbon footprint

Features
Wide range hardness (Shore 30A ~ 90A)
Anti-slip
Non-sticky
Easy to process
Overmolding to PP
Energy saving
Cut carbon footprint

Applications: screwdriver grip, garden tool grip, knife grip, car mat, sink plug, etc.

Details: A manufacturing technique used to create hollow plastic pieces is called blow molding. Extrusion blow molding, injection blow molding, and injection stretch blow molding are the three primary types of blow molding.
Extrusion blow molding is mostly used in the production of TPE products. TPEs are first melted into tubes to begin the procedure. A blow molding mold has the tube clamped inside of it. Air is blown into the tube after it has been welded together by being pinched at one end. The TPEs are expanded by the air to fit the mold chamber. The mold opens, and the part is ejected when the TPEs have cooled and hardened.
PHOENIX Thermoplastic Elastomers (TPEs) that are appropriate for blow molding have been created by HR Solution. They can be used for various things, such as balloon tamponade for medical purposes, BP cuff balloons, dropper suction, blower bulbs for toys, and automotive bellows.

Features
Smooth and silky surface
Non-sticky
Excellent tensile strength
Excellent resilience
Stable melt flow

Applications: blown film, BP cuff balloon, toys, medical balloon tamponade, blower bulb, etc.

Details: A procedure called extrusion is used to make things with a defined cross-sectional profile. The desired cross-section of a die is pushed through a material. The capacity to produce extremely complicated cross-sections and the ability to deal with fragile materials because the material only experiences compressive and shear stresses are the two key advantages of this technology over other production procedures. Additionally, it creates components with superb surface finishes.
Extrusion Grade PHOENIX Thermoplastic Elastomers (TPEs) have been developed by HR Solution and are appropriate for extrusion profiles, tubes, films, and sheets. For continuous extrusion, the material has a low MFI and relatively constant quality. The MFI of TPEs should typically be less than 3g/10min. Co-extruding Extrusion Grade Thermoplastic Elastomers (TPEs) with PP and PE results in a fantastic blend of hard and soft material. Thermoplastic Elastomers (TPEs) of the PHOENIX Extrusion Grade can also combine soft and hard TPEs.

Product Series
PHOENIX TPE 04 Series (Shore 30A ~ 80A)
SEBS based. High resilience grade with lowest melt flow index (MFI). For extrusion and blow molding. RoHS compliant. Conform to FDA, ISO 10993-5 & ISO 10993-10. Suitable for medical tube, extrusion profile, blown film, sheet

PHOENIX TPE 06 Series (Shore 15A ~ 95A)
SEBS based only. Superior weatherability. For outdoor use. FDA approved.

PHOENIX TPE 07 Series (Shore 15A ~ 95A)
SEBS based. Common grade for window profile and tube

PHOENIX TPE 16 Series (Shore 45A ~ 95A)
TPV+SEBS based. Higher heat resistance and good surface finish.
Suitable for window seal, extrusion profile, wire and cable sheath

Features
Smooth and silky surface
Non-sticky
Excellent tensile strength
Excellent resilience
Stable melt flow

Applications: tube, profiles, sheets, film, band, wire and cable sheath, etc.

Details: PHOENIX Thermoplastic Elastomers (TPEs) can be tailored by HR Solutions to meet your needs while also giving your products the best added value. Based on their extensive experience and in-depth understanding of the formulation, compounding, and marketing of TPEs, the Phon Tech R&D team can offer advice and construct materials.

Features
Wide range hardness are available (Shore 15OO ~ 65D)
Cost effective
Overmolding to particular substrates
Specific feeling and texture
Pre-colored TPE compounds (Volume, restrictions and terms may apply)
Exceptional physical properties

Applications: Any kind of application is possible to use our customized Thermoplastic Elastomer compounds. We expect the new developments and applications to be explored with you. Inform us your applications, hardness, process, color, and other requirements. We will find you the best solutions of TPEs.

Details: Engineering plastics are often rigid and strong for some high performance applications. By overmolding with PC, PC/ABS, PA, and ABS, PHOENIX alloy thermoplastic elastomers (TPEs) are functional TPE compounds intended to provide greater comfort feeling, attractive appearance, and higher value compared to engineering plastics. Abrasion resistance, oil resistance, lower compression set at higher temperatures, higher heat resistance, and other high performance criteria are also addressed by PHOENIX alloy thermoplastic elastomers (TPEs).

PHOENIX Alloy Thermoplastic Elastomers (TPEs), when combined with high performance thermoplastic vulcanizate (TPV), exhibit the performance properties of TPV, but offer the easier processing ability and enhance overall look compared to conventional TPV.

Product Series
PHOENIX Alloy TPE 12 Series (Shore 20A ~ 95A)
Overmolding to PC, ABS, PC/ABS, PA, PET-G.

PHOENIX Alloy TPE 16 Series (Shore 45A ~ 95A)
TPV+SEBS based. Higher heat resistance and good surface finish.

PHOENIX Alloy TPE 17 Series (Shore 45A ~ 95A)
TPV based. Matt finish. Excellent compression set and temperature resistance.

Features
Soft
Anti-scratch
Easy to process and color
Excellent tensile strength
Excellent heat resistance up to 120 ~135 Celsius degree
Excellent oil resistance
Good adhesion to engineering plastics, such as PC, ABS, PC/ABS, PA, PET-G

Applications: power tools (electrical tools), water valve, razor, pneumatic tools, computer mouse, electronic equipment, etc.

Details: The development of PHOENIX black TPE thermoplastic elastomer compounds is intended to meet the high demands of the black TPE material. The materials that produce a variety of characteristics are the black TPE compounds. For instance, the items’ matt texture, silky smooth feel, and dry gripping qualities add distinctive value. Most importantly, the black color TPE product family is filler added and offers an affordable option for customers seeking cost-saving solutions.

This product family has been thoroughly tested and optimized to satisfy a variety of customer needs. Each grade of PHOENIX Black TPE compounds embodies years of expertise, in-depth understanding, and cutting-edge technology.

Product Series
PHOENIX TPE 07 Series (Shore 15A ~ 95A)
SEBS based only. Superior weatherability. For outdoor use. FDA approved.

PHOENIX TPE 09 Series (Shore 15A ~ 95A)
SEBS + SBS based. General purpose. Economy grades.

Features

• • Wide range hardness (Shore 15A ~ 95A)
  • Anti-slip
  • Non-sticky
  • Easy to process
  • Overmolding to PP, PE
  • Reasonable price
  • Good resilience
  • UV stabilized
  • Meet FDA requirements

Applications: screwdriver grip, garden tool grip, knife grip, pen grip, food container seal, car mat, cutting board, sink plug, toothbrush, razor, bicycle handle grip, motorcycle handle grip, scuba diving fins, etc.